BionicCoat Underwater Ship Metal Ultra
Transparent coating that forms a thin top layer to easily protect metals for at least 10 years against corrosion and dirt adhesion. It also slows down color loss due to UV light. Available in 0.5 liter bottle and 1 liter bottle.
The advantages:
- Provides long-term protection against corrosion and dirt adhesion (including micro-organisms) and is UV-resistant.
- Deeply penetrating thanks to nanotechnology and very durable, placing a thin and powerful transparent filter on the material.
- Makes the material scratch resistant.
- Product is immediately ready for use, so do not dilute.
- Economical in use: approximately 25 – 30 m2 per liter.
How to apply?
It is advisable to apply a test area first. The surface must be completely dry, clean and dust-free. If pre-cleaning takes place: use Isopropanol (99.9% alcohol). After curing the coating, if necessary, regular maintenance with BionicClean Enzyme Cleaner or BionicClean Ultra Cleaner. Apply BionicCoat Metal Ultra with a small foam roller, brush, airless spray system or cloth. Apply evenly covering visibly wet. Remove too much, because only little coating is needed. Only apply between 5 and 30 degrees Celsius. Do not apply in full sun. Treated surfaces are dry after approximately 2 hours and can be walked on at an ambient temperature of 20 degrees Celsius. Protect the substrate against moisture during drying.
Effect on metals
Guarantees
Under non-mechanical stress on the material on which the coating is applied, it is functional for many years.
Personal advice
If you are commercially active in the maritime sector, please contact BionicProtect, Veemarktkade 8 (1015), ’s-Hertogenbosch, The Netherlands for questions or an impressive demonstration. Mail to info@bionicprotect.nl or call +3185 902 6950.
BionicProtect
+31 (0)85 902 6950 info@bionicprotect.com