BionicCoat Overwatership Polyester
Transparent coating to easily protect the new polyester surface hull for years against dirt adhesion and the release of plasticisers. It also slows down color loss due to UV light. All this prevents the material from becoming porous, microorganisms can attach themselves and cracks and stains occur. Thanks to treatment with BionicCoat Above Water Ship Polyester, this is achieved for a long time. Does not give any shine, and therefore leaves the material virtually untouched visually. Available in 1 liter bottle, 5 liter jerry can and IBC (1,000 liters).
The advantages:
- Protects against dirt adhesion and is UV resistant.
- Deeply penetrating thanks to nanotechnology and very durable.
- Product is immediately ready for use, so do not dilute.
- Economical in use: approximately 25 – 30 m2 per liter.
How to apply?
It is advisable to apply a test area first. The surface must be completely dry, clean and dust-free. If pre-cleaning takes place: only use BionicClean Enzyme Cleaner or BionicClean Ultra Cleaner. Apply BionicCoat Above water hull Polyester with foam roller, brush, airless spray system or cloth. However, apply evenly covering visibly wet, everything must be absorbed into the substrate. Take away too much. Only apply between 5 and 30 degrees Celsius. Do not apply in full sun. Treated surfaces are dry after approximately 2 hours and can be walked on at an ambient temperature of 20 degrees Celsius. Protect the substrate against moisture during drying.
Operation on new polyester above water ship
Guarantees
With non-mechanical stress on the material on which the coating is applied, it is functional for at least 10 years.
Personal advice
If you are commercially active in the maritime sector, please contact BionicProtect, Veemarktkade 8 (1015), ’s-Hertogenbosch, The Netherlands for questions or an impressive demonstration. Mail to info@bionicprotect.nl or call +3185 902 6950.
BionicProtect
+31 (0)85 902 6950 info@bionicprotect.com