BionicCoat Hardwood
Coating to easily protect oak, mahogany, meranti, merbau and teak wood for at least 10 years against dirt adhesion, moisture and frost damage. Graffiti, for example, also does not get a chance to adhere. It also slows down color loss due to UV light. BionicCoat Hardwood is a transparent solvent-based impregnation agent. It is deeply penetrating, very economical in use and durable. Does not give any shine, and therefore leaves the material virtually untouched visually. Available in 1 liter bottle, 5 liter jerry can and IBC (1,000 liters).
The advantages:
- Deeply penetrating thanks to nanotechnology and very durable.
- Protects against moisture and dirt penetration and is UV resistant.
- Product is immediately ready for use, so do not dilute.
- Economical in use: approximately 25 – 30 m2 per liter.
How to apply?
It is advisable to apply a test area first. The surface must be completely dry, clean and dust-free. If pre-cleaning takes place: only use BionicClean Enzyme Cleaner or BionicClean Ultra Cleaner. Apply BionicCoat with a foam roller, brush, airless spray system or cloth. However, apply evenly covering visibly wet, everything must be absorbed into the substrate. Take away too much. Only apply between 5 and 30 degrees Celsius. Do not apply in full sun. Treated surfaces are dry after approximately 2 hours and can be walked on at an ambient temperature of 20 degrees Celsius. Protect the substrate against moisture during drying.
Effect on softwood
Guarantees
With non-mechanical stress on the material on which the coating is applied, it is functional for at least 10 years.
Personal advice
If you are commercially active within the wood (processing) sector, please contact BionicProtect, Veemarktkade 8 (1015), ’s-Hertogenbosch, The Netherlands for questions or an impressive demonstration. Mail to info@bionicprotect.nl or call +3185 902 6950.
BionicProtect
+31 (0)85 902 6950 info@bionicprotect.com