BionicCoat Above water hull Metal
Durable, penetrating coating to protect the metal above-water vessel simply, in a durable manner and long-term against corrosion, dirt adhesion (including micro-organisms), discoloration and adhesion of substances and materials. It also makes the ship easy to clean. BionicCoat Bovenwaterschip Metaal is a transparent solvent-based impregnation agent, deeply penetrating and very durable. Immediately ready for use. Available in 1 liter bottle, 5 liter jerry can and IBC (1,000 liters).
The advantages:
- Protects against corrosion and dirt adhesion (including micro-organisms) and is UV-resistant.
- Deeply penetrating thanks to nanotechnology and very durable.
- Product is immediately ready for use, so do not dilute.
- Economical in use: approximately 25 – 30 m2 per liter.
How to apply?
It is advisable to apply a test area first. The surface must be completely dry, clean and dust-free. If pre-cleaning takes place: use Isopropanol (99.9% alcohol). After curing the coating, if necessary, regular maintenance with BionicClean Enzyme Cleaner or BionicClean Ultra Cleaner. BionicCoat Above water hull Apply metal with foam roller, brush, airless spray system or cloth. However, apply evenly covering visibly wet, everything must be absorbed into the substrate. Take away too much. Only apply between 5 and 30 degrees Celsius. Do not apply in full sun. Treated surfaces are dry after approximately 2 hours and can be walked on at an ambient temperature of 20 degrees Celsius. Protect the substrate against moisture during drying.
Operation on metal bottom
Guarantees
Under non-mechanical stress on the material on which the coating is applied, it is functional for many years.
Personal advice
If you are commercially active in the maritime sector, please contact BionicProtect, Veemarktkade 8 (1015), ’s-Hertogenbosch, The Netherlands for questions or an impressive demonstration. Mail to info@bionicprotect.nl or call +3185 902 6950.
BionicProtect
+31 (0)85 902 6950 info@bionicprotect.com